Choosing Upvc Window Replacement Hinges
It's not as difficult as it may seem to choose and fit Upvc replacement hinges. Make sure that the hinges' arrows are facing the correct direction and measure the thickness of the hinge arms on the frame opening (13mm or17mm).
There are several different types of hinges, each with its own unique features. This article will focus on the most commonly used types of uPVC window hinges and the advantages they offer.
Egress/Easy Clean Hinge
They are an excellent choice for replacing or upgrading the fire escape safety window, as they can be opened at a 90-degree angle. They can be closed to an easy-clean position that allows you to see the windows' exterior without having to climb ladders or lean at risky angles.
Yale is one of the most trusted and well-known brands in the world of home security. These hinges can be used with any kind of uPVC side hung window. They can be moved into the easy-clean position by pressing a small button and then moving the window sash to one side. Once closed, the window sash will be returned to its original position.
They are available in both 13mm and 17mm stack heights. Based on the size of your window, we suggest using our Egress Selection Guide to determine which one is the best fit for you.
These hinges are designed to work with standard side-hung frames, either uPVC or aluminium. They come with an easy friction screw that can alter the amount of resistance generated. This allows for easier opening of the window and reduces the possibility of an accidental closure during strong winds. They have been tested for more than thirty thousand cycles, and they are compliant with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.
Without buttons or catches, The Nico Egress Easy Clean Friction Hinge is easy to use and provides a convenient solution for emergency egress and secure cleaning. The hinge retention clip is located on the inside of the bottom corner. This will open the bottom and top catches which will allow you to slide the sash into an easy-clean position. Once it is in the easy-clean position, close the window to reset the hinges back to their egress position.
Fire-Escape Hinge
Fire Escape Hinges (also called "Easy Clean") are used to replace side-opening windows to ensure fire safety. They allow for an opening larger in the event of fire. Building regulations stipulate that this type of hinge has to be set in any room that has a window.
The windows have the benefit of a friction stop that allows them to open to 90 degrees. They also allow the opening sash to slide across the glass when it's opened which allows for simple cleaning without the need to use ladders. The hinges have no fiddly catch or buttons and operate with a simple, safe lever that is accessible from the inside of the home.
The hinges are produced in the UK by Cotswold and come complete with a child safety limiter for day-to-day use that can be overridden with a hidden button giving you peace of mind that your children won't accidentally open the door too far. The stack heights are 13mm or 17mm.
Take a measurement of the length of the existing side-hung window hinge, which is fixed to the frame. (See the guide on measuring the length of upvc window hinges). Select the correct size hinge from the list below.
Please note that the measurement is taken from the component that attaches to the frame, not the sash. The actual hinge length could be shorter or larger based on the manufacture of your old windows. When deciding on the width of the hinge most upvc frames will fit a stack height of 13mm, but if your old window frame is 17mm, then select this option. You can also utilize the 4mm packer to make up the difference. All the hinges are supplied with two hands (1 left and one right). The hinges are not equipped with screws. They can be purchased separately if you require. Our window repair screws made of upvc are recommended. These screws are designed to improve your hinges' performance and allow them work efficiently for a longer. They feature a design with reduced friction and an enhanced weather seal with caps made of nylon.
Restricted Hinge
There are instances when a window needs to completely open, and this can be a challenge using a standard hinge. These restricted child safety friction hinges help to overcome this issue and are a great solution when ventilation is needed but access to clean up or escape in case of fire is not possible. They work by restricting the amount that the sash can open and allow the to override this restriction by pressing an option. view it now are available in 13mm or 17mm stack heights and can be used to open top and side-hung windows.
The Nico Restricted Egress Friction hinge combines the characteristics of a standard restrictor and a fire escape hinge to provide an efficient and simple method to comply with building regulations. It is available in 13mm and 17mm stack heights and can be used for both side and top opening uPVC window. It is offered in a pair, where one hinge is the restricted egress and the other unrestricted allowing one of these to be installed to the bottom of the sash whilst the other is attached to the top.
These uPVC hinges are restrictive and have been tested to BS6375, part 2 and are designed for use on a window that cannot be opened fully like a small children's bedroom. The mechanism limits the amount the sash can open up to the safety level of 100mm and re-engages once the window is closed.
These uPVC friction-type hinges can be used with any type of windows. They are especially useful for windows that are hard to reach, such as those in three-storey houses or those which would require the use of a ladder. These can be enhanced with our security features, including hinge guards and protection plates for the hinge or dog bolts, to achieve PAS 24 performance.
When replacing a hinge on a window, it is important to determine the length of the existing hinge to ensure that you get replacements that are comparable in size. This can be done by looking at the image gallery of the hinge and then deciding where you would like it to be. Top hung hinges can be restricted on both sides, while side hung hinges are restricted to one side.
Standard Hinge
A standard hinge has metal-to-metal contacts and has no additional components to reduce friction. It is available in a variety of finishes, and is fire rated. To quickly determine the radius of hinges, lay it out flat and align a quarter dime in two corners. If the dime is more snug, the corner is rounded by 1/4 inch. If the quarter fit better, it's rounded by 5/8 inch.
The right hinge can make or break the appearance of your door. Matching the style and design of your hinges with your door will give it a cohesive and attractive design.